SEARCH NOW FOR ALL YOUR APPLIED MOTION PRODUCTS SOLUTIONS
Radwell is here to supply you with all your plant floor needs.
Servo Products / Stepper Motor
Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.
Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Filter Results
APPLIED MOTION PRODUCTS
3540I
DISCONTINUED BY MANUFACTURER, DC MICROSTEP DRIVE W/ SI PROGRAMMING, 0.21-3.5 A/PHASE, 12-42VDC, 8 DIGITAL INPUTS, 3 DIGITAL OUTPUTS, RS-232, 1 RED/GREEN STATUS LEDS
✓ IN STOCK!
£751.06
Price with VAT:
£901.27
APPLIED MOTION PRODUCTS
3540M
DISCONTINUED BY MANUFACTURER, (1000-107), DC MICROSTEP DRIVE, PCB BOARD
✓ IN STOCK!
£237.78
Price with VAT:
£285.33
APPLIED MOTION PRODUCTS
HT23-398
DISCONTINUED BY MANUFACTURER, STEPPER MOTOR, SERIES HT23, 4.24AMP, 1.6V
✓ IN STOCK!
£70.57
Price with VAT:
£84.69
APPLIED MOTION PRODUCTS
HT23-400
DISCONTINUED BY MANUFACTURER, STEPPER MOTOR, HIGH TORQUE, 2-PHASE HYBRID STEP MOTOR, 23 FRAME SIZE, 2 AMP, 4.5V, SUGGESTED REPLACEMETNT IS HT23-600
✓ IN STOCK!
£165.30
Price with VAT:
£198.36
APPLIED MOTION PRODUCTS
4023-820P
STEPPING MOTOR 3.9AMP 1.3VDC
✓ IN STOCK!
£32.66
Price with VAT:
£39.20
APPLIED MOTION PRODUCTS
5023-496
DISCONTINUED BY MANUFACTURER, STEPPER MOTOR, 3.6 V, 1.4 AMP, 2.6 OHM, 200S/R
✓ IN STOCK!
£109.74
Price with VAT:
£131.69
APPLIED MOTION PRODUCTS
5034-233
DISCONTINUED BY MANUFACTURER, STEPPER MOTOR, 2 PHASE, 120 VAC, 50/60 HZ, FOR COMPUMOTOR S83-135-MO DRIVE
✓ IN STOCK!
£509.01
Price with VAT:
£610.81
APPLIED MOTION PRODUCTS
5023-325
STEPPER MOTOR 4VDC 1.1AMP
✓ IN STOCK!
£38.83
Price with VAT:
£46.60
Repair Yours
Contact Us
APPLIED MOTION PRODUCTS
STAC6-SE
ADVANCED MICROSTEP DRIVE, WITH ENCODER INPUT, (5000-118) STEP DRIVE
✓ IN STOCK!
£772.45
Price with VAT:
£926.94
APPLIED MOTION PRODUCTS
HT23-401
DISCONTINUED BY MANUFACTURER, STEP MOTOR, HIGH TORQUE, NEMA 23, 2-PHASE HYBRID
✓ IN STOCK!
£207.13
Price with VAT:
£248.56
APPLIED MOTION PRODUCTS
HT23-594
2-PHASE HYBRID STEP MOTOR, SINGLE SHAFT, HIGH TORQUE DESIGN,STANDARD NEMA 23 DIMENSIONS
✓ IN STOCK!
£55.74
Price with VAT:
£66.89
APPLIED MOTION PRODUCTS
HT23-601
STEP MOTOR CORE, 4.2V, 18 IN CABLE LENGTH, WIRE COUNT: 8, NEMA 23 HIGH TORQUE
✓ IN STOCK!
£81.42
Price with VAT:
£97.70
APPLIED MOTION PRODUCTS
HT34-488
STEP MOTOR 2-PHASE HYBRID, 3919 MNM HOLDING TORQUE, STANDARD NEMA 34 DIMENSIONS, 1.8 DEG/STEP, SINGLE SHAFT, SQUARE BODY, 22 AWG
✓ IN STOCK!
£232.17
Price with VAT:
£278.60
APPLIED MOTION PRODUCTS
HT23-398D
DISCONTINUED BY MANUFACTURER, 2-PHASE HYBRID STEP MOTOR, HIGH TORQUE DESIGN, STANDARD NEMA 23 DIMENSIONS, ENCODER RESOLUTION: 2000 LINES, INSULATION CLASS: B
✓ IN STOCK!
£38.35
Price with VAT:
£46.02
Repair Yours
Contact Us
APPLIED MOTION PRODUCTS
HT23-396
STEPPER MOTOR 2PHASE NEMA23 1.0AMP 7.2OHM 7.2V
✓ IN STOCK!
£61.32
Price with VAT:
£73.58
Repair Yours
Contact Us
APPLIED MOTION PRODUCTS
HT23-598
STEP MOTOR CORE,STEPPER MOTOR, NEMA 23 FRAME SIZE, 158 OZ-IN HOLDING TORQUE
✓ IN STOCK!
£65.29
Price with VAT:
£78.35
Repair Yours
Contact Us
APPLIED MOTION PRODUCTS
HT34-474
DISCONTINUED BY MANUFACTURER, STEP MOTOR, 2 PHASE, 34 NEMA HYBRID, HIGH TORQUE, 12.7 MM SHAFT
✓ IN STOCK!
£192.49
Price with VAT:
£230.99
APPLIED MOTION PRODUCTS
HT34-496
HYBRID STEP MOTOR, HIGH TORQUE DESIGN, 2-PHASE, NEMA 34 FRAME, 22 AWG, 8 LEAD WIRES/FLYING/18 IN, 2000 LINES ENCODER RES, 1.8 DEG STEP ANGLE, 785 OZ-IN UNIPOLAR HOLDING TORQUE, 1110 OZ-IN BI ...
✓ IN STOCK!
£230.44
Price with VAT:
£276.53
APPLIED MOTION PRODUCTS
HT34-506
STEP MOTOR, HIGH TORQUE DESIGN, STANDARD NEMA 34 DIMENSIONS, SERIES OR PARALLEL WIRING, THE MOTOR IS UL RECOGNIZED, 2-PHASE HYBRID
✓ IN STOCK!
£241.22
Price with VAT:
£289.46
APPLIED MOTION PRODUCTS
STM17R-3NE
INTEGRATED STEPPER, (STM17R-3NE), NEMA 17, STEP & DIRECTION, W/ ENCODER
✓ IN STOCK!
£145.25
Price with VAT:
£174.30
APPLIED MOTION PRODUCTS
STM23S-2AN
DISCONTINUED BY MANUFACTURER, INTEGRATED DRIVE ADN MOTOR, NEMA23, SCL
✓ IN STOCK!
£236.37
Price with VAT:
£283.64
APPLIED MOTION PRODUCTS
5000-194
STEPPER DRIVE, (STAC5-IP-E120), STEP MOTOR DRIVE
✓ IN STOCK!
£266.28
Price with VAT:
£319.54
APPLIED MOTION PRODUCTS
5000-235
STEPPER DRIVE, (STR2 ), STEPPER DRIVE, STEP & DIR INPUT
✓ IN STOCK!
£85.83
Price with VAT:
£103.00
Repair Yours
Contact Us
APPLIED MOTION PRODUCTS
5034-348
DISCONTINUED BY MANUFACTURER, HYBRID STEP MOTOR, 2-PHASE, STANDARD TORQUE, 2.1 VDC, 2.42 AMP, 1.8 DEGREEE STEP ANGLE, FLYING LEADS
✓ IN STOCK!
£213.07
Price with VAT:
£255.68
APPLIED MOTION PRODUCTS
HT23-393
DISCONTINUED BY MANUFACTURER, STEP MOTOR, 2 PHASE HYBRID, NEMA 23, 8-WIRE, 5.2 VDC, 1.8 DEGREE STEP ANGLE
✓ IN STOCK!
£84.85
Price with VAT:
£101.82
Repair Yours
Contact Us
APPLIED MOTION PRODUCTS
HT23-393D
STEPPER MOTOR HIGH TORQUE 2PH 5.2V
✓ IN STOCK!
£20.53
Price with VAT:
£24.64
Repair Yours
Contact Us
APPLIED MOTION PRODUCTS
5000-182
STEPPER DRIVE, (ST10-IP-EE), STEP MOTOR DRIVE
✓ IN STOCK!
£638.94
Price with VAT:
£766.73
APPLIED MOTION PRODUCTS
5023-100
DISCONTINUED BY MANUFACTURER, STEPPING MOTOR, 200 STEPS PER REV, 3.2VDC, 2AMP, HOLDING TORQUE 81.6 OZ IN, IMPEDANCE PROTECTED
✓ IN STOCK!
£123.09
Price with VAT:
£147.71
APPLIED MOTION PRODUCTS
HT17-068
STEP MOTOR, 2-PHASE HYBRID, HIGH TORQUE DESIGN, 1.8 DEG STEP ANGLE, 1 SHAFT, NO ENCODER, 8-WIRE/FLYING LEADS/12 INCH LENGTH/26 AWG, 2000 LINES ENCODER RESOLUTION
✓ IN STOCK!
£51.94
Price with VAT:
£62.33
APPLIED MOTION PRODUCTS
HT17-075
DISCONTINUED BY MANUFACTURER, STEP MOTOR, 1.8 DEG, DC 4V, 12A, 200S/R, REPLACED BY HT17-275
✓ IN STOCK!
£98.64
Price with VAT:
£118.37
Repair Yours
Contact Us
APPLIED MOTION PRODUCTS
HT23-397
DISCONTINUED BY MANUFACTURER, STEP MOTOR, HIGH TORQUE, 5.1V, 1.41AMP, 8 PIN, 18IN CABLE, NEMA 23, 1.8 DEGREE STEP, SUGGESTED REPLACEMENT IS HT23-597
✓ IN STOCK!
£185.44
Price with VAT:
£222.53
APPLIED MOTION PRODUCTS
HT23-401D-ZAA
DISCONTINUED BY MANUFACTURER, STEPPER MOTOR, 2 PHASE, HIGH TORQUE, 2000 CPR, NEMA 23
✓ IN STOCK!
£193.00
Price with VAT:
£231.60
APPLIED MOTION PRODUCTS
STM24IP-3EE
INTEGRATED STEPPER, (STM24IP-3EE), NEMA 24, ETHERNET/IP, W/ ENCODER
✓ IN STOCK!
£617.67
Price with VAT:
£741.20
APPLIED MOTION PRODUCTS
5034-369D
STEP MOTOR, HYBRID TYPE, 2-PHASE, STANDARD NEMA 34 DIMENSIONS, STANDARD TORQUE, 5.08" MOTOR LENGTH, 8 LEAD WIRES, SHIELDED CABLE W/O CONNECTOR, 10 FT. CABLE, 22 AWG, 1.8 DEG. STEP ANGLE, 4.1 ...
✓ IN STOCK!
£327.17
Price with VAT:
£392.60
APPLIED MOTION PRODUCTS
HT23-601C
STEPPER MOTOR, HIGH TORQUE, NEMA 23, 10 FEET CABLE, 2 PHASE, 8 WIRE, 22 AWG
✓ IN STOCK!
£68.97
Price with VAT:
£82.77
Repair Yours
Contact Us
APPLIED MOTION PRODUCTS
5023-168D
STEP MOTOR, 2-PHASE HYBRID STEP MOTOR , STANDARD NEMA 23 DIMENSIONS
✓ IN STOCK!
£106.71
Price with VAT:
£128.05
APPLIED MOTION PRODUCTS
HT17-222
STEP MOTOR, HIGH TORQUE, 0.9 DEG, NEMA 17, 2-PHASE HYBRID, 400 STEPS PER REVOLUTION
✓ IN STOCK!
£23.84
Price with VAT:
£28.61
Repair Yours
Contact Us
APPLIED MOTION PRODUCTS
HT23-601D-ZAA
STEPPER MOTOR, (HT23-601D-ZAA), STEP MOTOR ENCODER, 24-VOLT HOLDING BRAKE MOUNTED, MAX HOLDING TORQUE (MNM)- 1890, 4.14 A
✓ IN STOCK!
£107.05
Price with VAT:
£128.46
APPLIED MOTION PRODUCTS
TXM24IP-1EG
STEPSERVO INTEGRATED MOTOR, (TXM24IP-1EG), NEMA 24, IP65, ETHERNET/IP
✓ IN STOCK!
£445.88
Price with VAT:
£535.06
APPLIED MOTION PRODUCTS
TXM34IP-6DG
STEPSERVO INTEGRATED MOTOR, (TXM34IP-6DG), 24-70 VDC, 8 AMP, NEMA 34, IP65, M12 CONNECTORS, ETHERNET, DUAL PORT, CLASS B INSULATION
✓ IN STOCK!
£1,383.52
Price with VAT:
£1,660.22
APPLIED MOTION PRODUCTS
TSM34Q-3DG
STEPSERVO INTEGRATED MOTOR, (TSM34Q-3DG), NEMA 34, Q PROG, ETHERNET, DUAL PORT, 24-70V DC,
✓ IN STOCK!
£527.59
Price with VAT:
£633.11
APPLIED MOTION PRODUCTS
TXM24Q-3EG
STEP SERVO INTEGRATED MOTOR, 12-70 VDC, NEMA 24, IP65, Q PROGRAMMING
✓ IN STOCK!
£506.73
Price with VAT:
£608.08
APPLIED MOTION PRODUCTS
HT23-597D
STEP MOTOR, WITH DOUBLE SHAFT, NEMA 23, HIGH TORQUE, 2-PHASE HYBRID, TERMINATED WITH 8 MOTOR LEADS, SUGGESTED REPLACEMENT FOR HT23-397D
✓ IN STOCK!
£79.18
Price with VAT:
£95.01
APPLIED MOTION PRODUCTS
HT34-697
STEP MOTOR, W/DOUBLE SHAFT, TWO-PHASE, NEMA 34, MAX RADIAL LOAD:50LBS, MAX THRUST LOAD:35LBS, 4.45 OHMS/PHASE, SHAFT DIAMETER: 15.875 MM (0.625")
✓ IN STOCK!
£278.76
Price with VAT:
£334.51
APPLIED MOTION PRODUCTS
HT34-488D
DISCONTINUED BY MANUFACTURER, STEPPER MOTOR 2-PHASE HYBRID, 1.8 DEGREE STEP, 4.3 AMP, 2 PHASE, 32 V, NEMA 34, DOUBLE SHAFT
✓ IN STOCK!
£261.10
Price with VAT:
£313.32
APPLIED MOTION PRODUCTS
HT11-013D
STEP MOTOR, 1.8 DEG, 2.0V, 1.0A
✓ IN STOCK!
£67.32
Price with VAT:
£80.79
Repair Yours
Contact Us
APPLIED MOTION PRODUCTS
HT34-485D
STEPPER MOTOR, 2-PHASE, HYBRID, NEMA 34, SERIES / PARALLEL WIRING, 42 LB RADIAL LOAD, 1.8 DEG STEP ANGLE, DOUBLE SHAFT
✓ IN STOCK!
£287.47
Price with VAT:
£344.96
APPLIED MOTION PRODUCTS
HT23-397-500
DISCONTINUED BY MANUFACTURER, 1.8 DEGREE STEPPER MOTOR, 2-PHASE HYBRID STEP MOTOR, HIGH TORQUE DESIGN, 1/4 INCH DIAMETER STROKE, 1 1/4 INCH STROKE LENGTH, 2.83 AMPS, 2.5 VOLTS, 0.9 OHMS
✓ IN STOCK!
£97.75
Price with VAT:
£117.30
APPLIED MOTION PRODUCTS
TSM23X4G-IP
SERVO MOTOR, STEPPER, NEMA 23, 12-70 VDC, 4.3 A, SHAFT DIAMETER 0.32 IN, MAXIMUM RADIAL LOAD 17 LBS, MAXIMUM THRUST LOAD 2.5 LBS
✓ IN STOCK!
£530.37
Price with VAT:
£636.44
